PearTune MSO Tuning elektrokola FLYON TQ
PearTune MSO-TQ is an e-bike tuning set (followed „MSO“) used for removing the speed limiter of electric asisted bycicles with centerdrives TQ used for example on Haibike FLYON.
Fully tested and compatible with Haibike FLYON All Mountain 2020!!!!
ORIGINAL connectors for very easy installation: PLUG and PLAY!
REAL SPEED on the display!
ACTIVATION whenever during the ride!
Speed limit: fully removed
Activation: LIGHT button or +-+- buttons
Display of values on the display: real speed values
Product code (SKU): PT-MSO-TQ
Detailed product description:
PearTune is connected to the e-bike system with compatible and original connectors. The MSO does not need to be configured manually. The entire configuration and adaptation to the paticular e-bike is done automatically. The MSO is connected in between the magnetic speed sensor and the motor unit, and in between the display and the motor unit. MSO is powered from the display connector. All readings about speed like actual speed, max speed, average speed are correctly displayed. Only the distance could be read a little bit less than real is.
The MSO can be activated or deactivated anytime during the ride by pressing of LIGHT BUTTON or "+" and "-" buttons. The device state is indicated by the speed gauge which will show "9.9"/"2.5" for a short while after activation/deactivation the PearTune, so the rider can always know whether the device is active or not.
Thanks to original connectors the e-bike tuning can be deinstalled without any signs.
The speed limit is REMOVED completely without any side effects. Not just shifted to 50km/h.
The only difference is that from the moment of installation you, not your bike, determine how fast you go. The maximum speed is limited only by the pedaling frequency.
Avalaible also in "STILL ON" version - make a note during your order and we will configurated it for you to Still ON version - the PearTune is then ON/OFF automatically when your bike is ON/OFF. So, no buttons for activation are needed.
Compatible original connectors, extremely miniature waterproof enclosure. Can be deinstalled without any signs.
- Microcontroller-based electronics. Automatic adjustment of all the required parametrs.
- Works seamlessly with HAIBIKE FLYON with TQ engine.
- We offer similar for all another BROSE, BOSCH, YAMAHA, GIANT and SHIMANO systems.
- Unlike similar sets, this device shows no display flickering or other unwanted effects. Everything else, but the speed limit removal, stays the same.
- The only difference is that you can go the speed you want with your bike.
- 60km/h with assist? Just plug & enjoy!
Usage
The MSO can be activated or deactivated anytime during the ride by once short-press of the light button or +-+- buttons. Original function of this button remains unchanged with a long-press and the walk assist function can be used like before.
Manufacturer
PearControl s.r.o.
Příkopy 1889
393 01 Pelhřimov
CZECH REPUBLIC
Technical parameters
- Dimension without wiring: 12 x 25 x 4mm
- Supply voltage range: 5 - 15 V
- Maximum current consumption: 100 mA
- Maximum power usage: 1.5W
- Mass: cca 20g
The voltage is lower then 20 V in all device and on I/O pins too
Legislation
The manufacturer reserves the right to make changes. This manual is an integral part of the equipment sold. By using the equipment PearTune MSO its user agrees that he will use the modified e bike in accordance with the applicable legislation of the target country and so does even off-road; therefore, he is free to use it only on his own land or on land designated for that purpose. The user also acknowledges that the operation of bicycles outside their own land or land designated for this purpose with deactivated, but installed equipment PearTune MSO may not be in compliance with legislation. The manufacturer does not warrant non-infringement of bicycle warranties or impossibility of damage or blockage of the e-bike system. The manufacturer disclaims liability for any damages, whether in health or property associated with installing or using this product.
The manufacturer holds the certificate of electromagnetic compatibility testing - Compliance with EU regulations (CE marking) aswell as the certificate of restriction of the use of Hazardous Substances (RoHS label).